Texas Instruments TMAG5170, Руководство пользователя, Страница: 4 / 22

4.2 EVM Operation
To use the EVM with the included TI-SCB Controller, connect the EVM as shown in Figure 4-1 .
Figure 4-1. EVM on TI-SCB Controller
It is optional to snap apart the TMAG5170UEVM to separate the TMAG5170A1 and TMAG5170A2 halves. This
may be done by flexing the PCB at the indicated boundary below
Figure 4-2. TMAG5170UEVM Snap Apart Edge
4.2.1 Setup
4.2.1.1 Driver Installation
Download and install this driver: http://www.ti.com/lit/zip/sbac253 . This is a one-time step per computer. Unzip
the folder and run the .exe file with administrator privileges.
4.2.1.2 Firmware
The GUI is capable of loading firmware onto the TI-SCB as described in Section 4.2.1.3.1 . Firmware updates will
be pushed through the GUI (requires driver installation). Downloaded offline GUIs may check for GUI/Firmware
updates depending on the version.
Operation www.ti.com
4 TMAG5170UEVM SBAU388A – SEPTEMBER 2021 – REVISED FEBRUARY 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated