Texas Instruments TMAG5170, Руководство пользователя, Страница: 6 / 22

4.2.1.3 GUI Setup and Usage
Access the GUI from the below link in either Chrome or Firefox:
• TMAG5170EVM GUI:
https://dev.ti.com/gallery/view/1253127/TMAG5170UEVM_GUI
4.2.1.3.1 Initial Setup
To set up the GUI the first time, follow the below instructions:
1. Make sure that the above mentioned driver was installed successfully to ensure that everything works
properly and that the GUI can update the EVM firmware, if necessary.
2. With the EVM/TI-SCB Controller unit plugged to the PC, go to the GUI link provided above.
3. To launch the GUI from the web browser, click the
GUI Composer application to open the GUI Composer
window (see Figure 4-4 ).
Figure 4-4. GUI Composer Application Window
a. For first-time GUI Composer setup, follow the prompts to download the TI Cloud Agent and browser
extension shown in Figure 4-5 . These prompts will appear after you close the README.md dialog.
Figure 4-5. TI Cloud Agent
4. Optionally, the GUI can be downloaded for offline use by clicking the icon in the GUI Composer window
shown in Figure 4-4 .
Operation www.ti.com
6 TMAG5170UEVM SBAU388A – SEPTEMBER 2021 – REVISED FEBRUARY 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated