6.8
Device Controls Tab
Kit Operation
www.ti.com
Figure 5. Preset Configurations
The
Device Controls Tab
(
Figure 6
) contains six enumerated
Control Registers
sub tabs with controls
for all six registers of the TLV320AIC12K/14K, a register table at the bottom of the tab, several controls
and an indicator at the right of the tab. The
8-bit I
2
C Address
indicator shows the current I
2
C address.
The
Device Position
control lets the user select a specific codec on a master-slave chain to write to or
read from. The TLV320AIC12KEVMB-K/14KEVMB-K is configured as a stand-alone slave, so the device
position must be set to zero. The
Program Device
button, when pushed, programs the register
corresponding
only
to the selected
Control Registers
sub tab. The register table holds the current
register values in hexadecimal and binary format. The
Register Dump to File
button dumps the current
register values to a spreadsheet. Please refer to the
TLV320AIC12K/14K
datasheet for further details on
control register content.
14
TLV320AIC12KEVMB-K and TLV320AIC14KEVMB-K User's Guide
SLAU229B – October 2007 – Revised August 2008
Submit Documentation Feedback
