CHAPTER 2
11
Commands
Chapter 2:
Commands
This chapter describes the commands that can be sent to the reader or control mod-
ule from the controlling computer and the modes that the reader or control module
can work in.
Topic Page
2.1
Introduction .............................................................................................. 13
2.2
Reader Mode Commands ........................................................................ 13
2.2.1 64-bit Transponder Mode or K0 Mode .................................................13
2.2.2 Multipage Transponder Mode or K1 Mode...........................................13
2.3
General Commands ................................................................................. 13
2.3.1 Version Command ...............................................................................14
2.3.2 FORMAT Command ............................................................................14
2.3.3 CLEAR Command................................................................................15
2.3.4 READOUT BUFFER Command...........................................................15
2.3.5 I/O STATUS Command........................................................................15
2.3.6 SET OUTPUTS Command ..................................................................17
2.3.7 COMBINED Commands - SET OUTPUT & GET I/O Status................18
2.3.8 SET CHARGE PERIOD Command .....................................................21
2.4
64-Bit Transponder - K0 Mode ................................................................ 22
2.4.1 EXECUTE Command...........................................................................22
2.4.2 GATE Mode .........................................................................................22
2.4.3 STORE Command ...............................................................................23
2.4.4 READ MEMORY Command ................................................................24
2.4.5 RAM FILL Command ...........................................................................24
2.4.6 NUMBER Command ............................................................................25
2.4.7 LINE Function ......................................................................................25
2.4.8 NORMAL Mode/ESCAPE ....................................................................26
2.4.9 PROGRAM Command .........................................................................26
2.4.10ANTENNA Commands.........................................................................28
2.4.10.1 ANTENNA 1 Mode ..................................................................... 28
2.4.10.2 ANTENNA 2 Mode ..................................................................... 28
2.4.10.3 TOGGLE Mode .......................................................................... 29
