Texas Instruments TAS5105EVM, Руководство пользователя

Страница: 7 / 22

www.ti.com
Quick-Setup Guide
3.2 Unpacking the EVM
On opening the TAS5105EVM package, ensure that the following items are included:
• 1 pc. TAS5105EVM Power Stage Board
• 1 pc. MC016 Modulator/Controller Board
If any of these items are missing, contact the Texas Instruments Product Information Center nearest you
to inquire about a replacement.
Connect the MC106 Modulator/Controller Board to the TAS5105 Power Stage Board with the docking
connectors on each board. Use care because this connector is not keyed.
Figure 2. Modulator and Power Stage Board Connection Example
3.3 Power Supply Setup
To power up the EVM, one power supply is needed for system power, logic and gate-drive, and for output
stage supply. The power supply is connected to the EVM with banana cables or stripped insulated wire.
Table 2. Recommended Supply Voltage
Description Voltage Limitations Current Requirement Connector
Output stage power supply 8 V – 26 V 5 A Red/black
CAUTION
Applying voltages above the limitations given in Table 2 can cause permanent
damage to your hardware.
7 SLLU138 – January 2011 TAS5105EVM for the TAS5105 Digital Amplifier Power Output Stage
Submit Documentation Feedback
© 2011, Texas Instruments Incorporated