Quick-Setup Guide
www.ti.com
2.1
TAS5105EVM Features
•
Modular approach composed of TAS5105EVM Amplifier Modules and MC016 Modulator/Controller
Module
•
Two-channel evaluation module
•
Self-contained protection system (short-circuit and thermal)
•
No programming required
•
Double-sided, plated-through printed-circuit board (PCB) layout
•
Single power supply operation
NOTE:
The TAS5105 and MC016 require no programming, but this means that volume must be
controlled through the SPDIF or ADC source.
2.2
PCB Key Map
Physical structure for the TAS5105EVM is illustrated in
Figure 1. Physical Structure for TAS5105EVM
3
Quick-Setup Guide
This section describes the TAS5105EVM board in regards to power supplies and system interfaces. It
provides information regarding handling and unpacking, absolute operating conditions, and a description
of the factory default switch and jumper configuration.
The section also provides a step-by-step guide to configuring the TAS5105EVM for device evaluation.
3.1
Electrostatic Discharge Warning
Many components on the TAS5105EVM are susceptible to damage by electrostatic discharge (ESD).
Customers are advised to observe proper ESD handling precautions when unpacking and handling the
EVM, including the use of a grounded wrist strap at an approved ESD workstation.
CAUTION
Failure to observe ESD handling procedures can result in damage to EVM
components.
6
TAS5105EVM for the TAS5105 Digital Amplifier Power Output Stage
SLLU138 – January 2011
© 2011, Texas Instruments Incorporated
