Stellaris® LM3S9B92 Evaluation Kit Overview
10
January 6, 2010
Kit Contents
The EK-LM3S9B92 evaluation kit comes with the following:
EK-LM3S9B92 evaluation board
In-Circuit Debug Interface (BD-ICDI) board
– Connects to USB port on PC and to 10-pin, fine-pitch ARM JTAG connector on the
EK-LM3S9B92 evaluation board
– Secondary 8-pin Power/UART connector provides power and virtual comm-port capability
to the EK-LM3S9B92 evaluation board.
Cables
– USB miniB to USB-A cable
– USB-OTG to USB-A cable
– 10-pin ribbon cable for JTAG/SWD connection
– 8-pin ribbon cable for Power/UART connection
CD containing:
– A supported version of one of the following (including a toolchain-specific Quickstart
guide):
•
Keil™ RealView® Microcontroller Development Kit (MDK-ARM)
•
IAR Embedded Workbench
•
Code Sourcery GCC development tools
•
Code Red Technologies development tools
•
Texas Instruments’ Code Composer Studio™ IDE
– Complete documentation
– Quickstart application source code
– Stellaris® Firmware Development Package with example source code
Using the EK-LM3S9B92
The recommended steps for using the EK-LM3S9B92 evaluation kit are:
1.
Follow the Quickstart guide included in the kit. The Quickstart guide will help get the
EK-LM3S9B92 LC Evaluation Board up and running in minutes.
2.
Use your preferred ARM tool-chain and the Luminary Micro Peripheral Driver Library to
develop an application. Software applications are loaded using the BD-ICDI board. See
Chapter 3, “Software Development,” for the programming procedure. The StellarisWare
Peripheral Driver Library Software Reference Manual contains specific information on
software structure and function.
3.
Customize and integrate the hardware to suit an end application. This user's manual is an
important reference for understanding circuit operation and completing hardware modification.
Features
The EK-LM3S9B92 evaluation kit provides the following features:
Downloaded from
Elcodis.com
electronic components distributor
All manuals and user guides at all-guides.com
