Setup Procedure
3
Setup Procedure
Ensure that VCCA, VCCB and GND are all connected and configured properly. Bypass capacitors on the
VCCA and VCCB are recommended and will optimize device performance.
When connecting signals, minimize connection length and keep GND leads short when probing. This will
ensure minimal capacitive, resistive and inductive loading caused by the connection and connector.
For more device information please see the SN74AVC2T244 device datasheet or visit the TI support
forums:
4
PCB Layout
Figure 1. Top Layer
2
SN74AVC2T244 Evaluation Module
SCEU002
–
September 2011
Copyright
©
2011, Texas Instruments Incorporated