Texas Instruments PSIEVM, Руководство пользователя

Страница: 9 / 45

Connected to EVM
Output Plot
AC/DC Mode Output Type Selection
Amplitude
Setting
Offset/
Common Mode
Frequency
Setting
Output Enabled
www.ti.com
PSIEVM Operation
9 SBAU289 – October 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
Precision Signal Injector EVM (PSIEVM)
Figure 7. PSI GUI With Labels
3.2 Setting the Offset Voltage or Common-Mode Voltage
An offset voltage can be added to the single-ended output of the PSIEVM or a common-mode voltage can
be added to the differential outputs.
Table 4 shows the jumper combinations that are required to
implement an offset or common-mode voltage. Once the jumpers are placed in the correct configuration,
set the offset voltage or common-mode voltage through the GUI.
Table 4. Offset Voltage or Common-Mode Voltage Jumper Settings
Offset Voltage or Common-Mode
Voltage Setting
JP4 JP8
VOS or VCM = 0 V Ground Ground
Single-ended offset SE_VOS Ground
Differential common-mode voltage Ground DIF_VCM