Texas Instruments PGA2505EVMV2 Скачать руководство пользователя страница 12

Страница: 12 / 23

5 Software Operation

This section provides instructions for using the PGA2505EVMV2 application software and using the software to
control the

PGA2505

gain and support functions.

5.1 Applications Software Overview

The applications software supplied with the PGA2505EVMV2 allows the user to control the board using an
online GUI, found

here

. All programmable functions are supported.

5.2 Using the GUI

The following steps describe how to connect the EVM boards to a computer:

1. Connect the

MSP-EXP430F5529LP

to the PGA2505EVMV2 board.

2. Connect the micro USB end of the provided USB cable into the MSP430 board, and the other end of the

USB cable into an open USB port on the computer.

3. Launch the GUI to automatically flash the microcontroller and adjust all programmable functions. Successful

flash can be visually confirmed by the GPO LEDs flashing in sequence.

4. Manually set the COM port in the GUI composer to the COM port titled

Microsoft

after the successful flash by

clicking

File → Options → Serial Port

When successfully connected to the microcontroller through the serial COM port, the MSP430 acknowledges
successful GUI control actions by printing to the textbox shown in

Figure 5-1

GUI supports up to 8

PGAs with serial data

ports connected in series

When EVM is successfully

connected to MSP430 via
serial COM port, MSP430

will acknowledge successful

GUI control actions by

printing to this textbox

Figure 5-1. PGA2505EVMV2 GUI With Programmable Functions

Software Operation

www.ti.com

PGA2505EVMV2 Evaluation Module

SBOU259 – OCTOBER 2021

Submit Document Feedback

Содержание PGA2505EVMV2
























Результаты поиска

Содержание PGA2505EVMV2

Отзывы:

Похожие инструкции для PGA2505EVMV2

Бренды по названию

Популярные бренды

Texas Instruments PGA2505EVMV2, Руководство пользователя

Результаты поиска

Содержание PGA2505EVMV2

Отзывы:

Похожие инструкции для PGA2505EVMV2

Бренды по названию

Популярные бренды