Texas Instruments MSA011 Скачать руководство пользователя страница 8

Страница: 8 / 15

EVM Setup and Operation

www.ti.com

SGLU009 – November 2016

TPS382-Q1EVM (MSA011) Voltage Supervisor with Watchdog Timer User
Guide

EVM Setup and Operation

This section describes the functionality and operation of the TPS382-Q1EVM. The user should read the
TPS382x-Q1 datasheet for electrical characteristics of the device.

4.1

Input Power (VDD)

All VDD supplies are isolated from each other on the EVM, so all devices can be simultaneously powered
at different voltages.

Table 5

lists the nominal supply voltage and typical reset threshold voltage for each

device. The supply voltage on any device should not exceed 5.5V.

Table 5. Nominal Supply and Typical Threshold Voltages

Device

Nominal Supply Voltage (V)

Typical Threshold Voltage (V)

TPS3820-33-Q1

3.3

2.93

TPS3828-33-Q1

TPS3823-25-Q1

2.5

2.25

TPS3824-30-Q1

3.0

2.63

TPS3825-50-Q1

5.0

4.55

Figure 11. TPS3820-33-Q1 RESET Asserted Due to

Falling VCC

Figure 12. TPS3820-33-Q1 RESET De-Asserted Due to

Rising VCC, With Delay t

Figure 13. TPS3828-33-Q1 RESET De-Asserted Due to Rising VCC, With Delay t

Содержание MSA011
















Результаты поиска

Содержание MSA011

Отзывы:

Texas Instruments MSA011, Руководство пользователя, Страница: 8 / 15

Результаты поиска

Содержание MSA011

Отзывы: