background image

ZOOM

  

OMAP-L138 

EVM

QuickStart Guide

Congratulations on your purchase of the Zoom OMAP-L138 EVM Development Kit. This 
Zoom Development Kit provides a product-ready hardware and software platform for 
evaluating the functionality of the Texas Instruments (TI) OMAP-L138 processor and the 
Logic PD System on Module (SOM).

For more information:

www.logicpd.com/omapl138evm

411 N. Washington Ave. Suite 400  Minneapolis, MN 55401
T : 612.672.9495   F : 612.672.9489  I : www.logicpd.com

©2012 Logic PD, Inc. All rights reserved. Zoom is a trademark of Logic PD, Inc. The Texas Instruments 
logo and name are registered trademarks of Texas Instruments Incorporated. Terms and product names 
in this document may be trademarks of others.

PN 1022628A

If you are having trouble accessing the Linux OS 
demo on the included SD card, try the following: 

+Verify that the OMAP-L138 SOM is securely 

connected to the baseboard.

+Verify that all DIP switches are set to the OFF 

position.

+Verify that the correct SD card is inserted into 

the baseboard.

Troubleshooting

To gain access to kit and SOM documentation, 
register your kit on the Logic PD website at: 

support.logicpd.com/auth/register_product.php

Register Your Kit

Locate the 

START HERE folder on 

the SD card and view 

setup.htm. 

Use the information in 

setup.htm to 

determine the next steps specific 
to your development environment.

Linux DVSDK

For support questions, please contact:  

support.logicpd.com/support/askaquestion.php

For community support, please visit:  

www.ti.com/e2e

The TI Embedded Processors Wiki can be found at: 

processors.wiki.ti.com

For more information on the TI OMAP-L138 processor 
or to download the latest TI software, visit: 

www.ti.com/omap-l138-prprod1

Connect Ethernet 
cable to baseboard 
and host PC or 
router

11

Connect serial cable 
to baseboard and 
host PC

12

Next steps.  

(Prepare your workstation for software development.)

10

Secure boards 
with included nylon 
screws at the 
locations indicated

13

Remove SD card and 
insert it into included 
USB SD card reader; 
connect USB SD card 
reader to host PC

9

Power off kit and 
connect UI board to 
baseboard connectors at 
center and on the right

Отзывы: