Setup
6
SNAU114D – March 2006 – Revised June 2016
Copyright © 2006–2016, Texas Instruments Incorporated
Using the LMX2485E & LMX2487E Evaluation Board
1.4
Installing the EVM Software
Go to
http://www.ti.com/tool/codeloader
Click on the download button to download the software.
Run the executable file.
Figure 5. Using the EVM Software
On the Port Setup tab, the user may select the type of communication port (USB or Parallel) that will be
used to program the device on the evaluation board. If parallel port is selected, the user should ensure
that the correct port address is entered.
Don’t forget to press <Ctrl>+L or do Keyboard Controls -> Load Device, to load the settings.
