Operation
5
SNVU670A – February 2020 – Revised June 2020
Copyright © 2020, Texas Instruments Incorporated
LMR36506MSCEVM User’s Guide
2
Operation
2.1
Quick Start
1. Connect the voltage supply between the VIN_EMI and GND_EMI test points.
2. Connect the load between the VOUT and GND test points.
3. Set the supply voltage at an appropriate level between 5.5 V to 65 V. Set the current limit of the supply
to an appropriate level.
4. Turn on the power supply. With the default configuration, the EVM powers up and provides V
OUT
= 5 V.
5. Monitor the output voltage. The maximum load current must be 0.6 A with the LMR36506 device.
