Texas Instruments LM36923HEVM Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 29

Texas Instruments LM36923HEVM Скачать руководство пользователя страница 13

USB Interface Board and I

2

C-Compatible Interface Program

13

SNVU509 – January 2016

Submit Documentation Feedback

Copyright © 2016, Texas Instruments Incorporated

LM36923HEVM User's Guide

5

USB Interface Board and I

2

C-Compatible Interface Program

Texas Instruments has created an I

2

C-compatible program and USB docking board (USB2ANY) that can

help exercise the part in a simple way. Contained in this document is a description of how to use the
USB2ANY interface box and interface software.

The LM36923HEVM has the means to “plug into” the USB docking board. The USB docking board
provides all the control signals for the simple interface. Power to the part must be provided externally. A
USB cable (provided) must be connected to the board from a PC.

The I

2

C-compatible interface program provides all of the control that the LM36923H part requires. For

proper operation, the USB docking board should be plugged into the PC before the interface program is
opened. Once connected, and the program is executed, a basic interface window will open.

shows the default settings which are updated after the user clicks the Read All button.

5.1

User Interface

the LM36923H GUI provides the user with access to all of the registers found on the device. Through a
combination of buttons, drop-down boxes and sliders, the user can configure the LM36923H to perform in
the desired mode. Please note that each register is updated when the button, drop-down box, numeric
updown box or slider is changed. Individual register read is completed by clicking the Read button
associated with each register.

Figure 12. LM36923H General User Interface

«
...
11
12
13
14
15
...
»

Содержание LM36923HEVM






























Отзывы:

Нет отзывов