Texas Instruments HVL038, Руководство пользователя

Страница: 2 / 10

1 General
1.1 PURPOSE
To provide detailed instructions for testing the HVL038A modules.
1.2 SCOPE
Covers complete instructions for testing the HVL038A.
1.3 REFERENCE DOCUMENTATION
Schematic HVL038A_sch.pdf
Assembly HVL038A_pcb.pdf
1.4 MATERIALS
None
1.5 DEFINITIONS
DUT Device Under Test
2 SAFETY
2.1 Safety Glasses are to be worn.
2.2 This test must be performed by qualified personnel trained in electronics theory and understand the risks
and hazards of the assembly to be tested.
2.3 ESD precautions must be followed while handling electronic assemblies while performing this test.
2.4 Precautions should be observed to avoid touching areas of the assembly that may get hot or present a
shock hazard during testing.
3 QUALITY
3.1 None
4 APPAREL
Appropriate apparel must be worn during this test to ensure the safety of the operator as well as the safety of
the UUT. Example of appropriate apparel includes safety glasses, ESD smock, etc.
5 EQUIPMENT
The following equipment is needed to complete this test procedure
5.1 Power Supplies
A Single output power source capable of supplying 3.3V @ atleast 1A.
5.2 Meters
One DC Volt meter required
5.3 Wire for connecting points on board
Two single wires capable of inserting into female header and clipping to a test point.