TX
RX
3.6 V
TEST/SBWTCK
RST/SBWTDIO
GND
Supports eZ430-F2013
and T2012 target boards
Supported Devices
www.ti.com
12
Supported Devices
The eZ430-RF USB debugging interface may be used as a standard flash emulation tool through its
Spy-Bi-Wire interface. The eZ430-RF USB debugging interface supports the following MSP430 families:
•
MSP430F20xx
•
MSP430F22xx
The connector on the USB debugging interface is backward compatible with the eZ430-F2013 and T2012
target boards (see
Figure 35
).
Figure 35. eZ430-RF2500 USB Debugging Interface 6-Pin Male Header
13
MSP430 Application UART
The eZ430-RF USB debugging interface features a back channel MSP430 Application UART that may be
used independently of a debug session. This allows the user to transfer serial data to a terminal window at
a fixed rate of 9600 bps with no flow control. See
Figure 36
for typical settings.
Figure 36. 9600 bps With No Flow Control
Check the Device Manager for COM port assignment of the MSP430 Application UART. For more details,
see
Section 15
).
36
eZ430-TMS37157 Development Tool
SLAU281B
–
November 2009
–
Revised March 2010
Submit Documentation Feedback
Copyright
©
2009
–
2010, Texas Instruments Incorporated
