For scenario 2:
Limit the supply voltage ramp up time through a series resistor (e.g. 10 Ohm) in the critical
supply path. Side effects such as voltage dips due to high current consumption of the
device need to be considered.
BSL7
BSL Module
Category
Software in ROM
Function
BSL does not start after waking up from LPMx.5
Description
When waking up from LPMx.5 mode, the BSL does not start as it does not clear the Lock
I/O bit (LOCKLPM5 bit in PM5CTL0 register) on start-up.
Workaround
1. Upgrade the device BSL to the latest version (see Creating a Custom Flash-Based
Bootstrap Loader (BSL) Application Note - SLAA450 for more details)
OR
2. Do not use LOCKLPM5 bit (LPMx.5) if the BSL is used but cannot be upgraded.
BSL14
BSL Module
Category
Software in ROM
Function
BSL request to unlock the JTAG
Description
The feature in the BSL to keep the JTAG unlocked by setting the bit
BSL_REQ_JTAG_OPEN in the return value has been disabled in this device.
Workaround
None
CPU21
CPU Module
Category
Compiler-Fixed
Function
Using POPM instruction on Status register may result in device hang up
Description
When an active interrupt service request is pending and the POPM instruction is used to
set the Status Register (SR) and initiate entry into a low power mode , the device may
hang up.
Workaround
None. It is recommended not to use POPM instruction on the Status Register.
Refer to the table below for compiler-specific fix implementation information.
IDE/Compiler
Version Number
Notes
IAR Embedded Workbench
Not affected
TI MSP430 Compiler Tools (Code
Composer Studio)
v4.0.x or later
User is required to add the compiler
or assembler flag option below. --
silicon_errata=CPU21
MSP430 GNU Compiler (MSP430-
GCC)
MSP430-GCC 4.9 build 167 or later
CPU22
CPU Module
Category
Compiler-Fixed
Advisory Descriptions
8
MSP430F6736A Microcontroller
SLAZ646S – FEBRUARY 2015 – REVISED MAY 2021
Copyright © 2021 Texas Instruments Incorporated
