Schematic and PCB Layout
www.ti.com
6
SBOU193 – July 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DUAL-DIYAMP-EVM
6. Position separated PCB over pins and solder the connections. Carefully remove from the DIP socket.
Figure 6. Detached Board Configuration Position Over Terminal Pins
7. Attach SMA connectors, test points, or wires to the inputs and outputs of the separated PCB.
Figure 7. Fully-Assembled Circuit Configuration From DIYAMP-SOIC-EVM
3
Schematic and PCB Layout
This section provides the schematic and PCB layout of each circuit configuration provided on the EVM.
3.1
Schematic PCB Drawing
Each circuit board has the schematic of the circuit in silk screen located on the back of the PCB for easy
reference.
Figure 8
displays an example of a schematic on the back of the PCB.
Figure 8. Silk Screen Schematic
