Texas Instruments DS560MB410EVM, Руководство пользователя, Страница: 10 / 29

Figure 5-7. Device Status Tab
Table 5-1. Device Status Settings and Buttons
Seting or Button Name Behavior
Update Time Sets the time interval at which the device status is updated. This is only in use while
Continuous Status Update is checked.
Channel Select This setting is persistent when switching between the Device Status , Block Diagram , and
Crosspoint Switch tabs. This selection is only used in the Block Diagram tab.
Refresh From Device Reads register data from the device. This data will then be updated in the DS560MB410
Profile pages.
Reset Device Resets all device registers to their default values.
Load From File Opens a window allowing the user to select a file with register data. Once the appropriate file
is selected, register data from the file will be written to device registers.
Save To File Opens a window enabling the user to save device register data to their computer. This file
contains data for all of the device registers.
Continuous Status Update When checked, the registers from the device will be polled at the rate set by the Update
Time setting.
5.3.2 Block Diagram
The Block Diagram tab allows for configuration of channel registers that are pertinent to most use cases. Each
parameter can easily be adjusted by selecting the appropriate value from the drop down menus
It is important to select the appropriate channel through the Channel Select drop down menu in the top left prior
to adjusting the channel settings. Unapplied changes will not be saved when the channel is changed. To apply
changes, click
Apply to Channel . To apply changes to all channels, click Apply to All Channels .
SigCon Architect www.ti.com
10 DS560MB410EVM SNLU296A – DECEMBER 2022 – REVISED DECEMBER 2022
Submit Document Feedback
Copyright © 2022 Texas Instruments Incorporated