CAUTION
The DRV8300Dxxx-EVMs are designed to be evaluated only with the LAUNCHXL-F280049C MCU
PCB which must be ordered separately.
The 3.3V
DC
power to the LAUNCHXL-F280049C is provided from the DRV8300Dxxx-EVM.
To ensure high voltage isolation between the DRV8300Dxxx-EVM and the LAUNCHXL-F280049C
board, the three isolation jumpers must be removed as shown below.
Figure 1-2. JP1/JP2/JP3 Removed
WARNING
Although the MCU PCB provides isolation of up to 3000 V
RMS
to the USB, the DRV8300Dxxx-EVM
itself is considered an electrically live EVM and is not intended nor designed for isolation voltage
testing. Voltages exceeding the standard EVM ratings as specified on the data sheet may cause
personal injury, electrical shock hazard, damage the EVM, or a combination.
Additionally, do not leave power connections to the EVM connected while not in operation.
WARNING
Hot surface
. Contact may cause burns. Do not touch.
2
DRV8300xxx-EVM User’s Guide
SLVUBV6 – APRIL 2020
Copyright © 2020 Texas Instruments Incorporated