www.ti.com
DRV2604L Demonstration Program
2.2
Description of the Demo Modes
The following sections describe each demo mode in more detail.
2.2.1
Mode Off – Haptics Effect Sequences
Mode Off is a set of haptic sequences that combine a series of haptic effects. The two effects below show
combinations of clicks and ramps.
Figure 4. ERM Click and Bounce
Figure 5. LRA Ramp-Up and Click
Waveform (Button 1)
Waveform (Button 2)
2.2.2
Mode 4 – ERM Clicks
Mode 4 shows the difference in open-loop and closed-loop ERM clicks. In closed loop, the driver
automatically overdrives and brakes the actuator. In open-loop, the waveform must be predefined with
overdrive and braking. The image on the left shows a closed-loop waveform and the image on the right
shows the same input waveform without closed-loop feedback enabled.
Figure 6. ERM Closed-Loop Click Waveform (Button 1)
Figure 7. ERM Open-Loop Click Waveform (Button 4)
7
SLOU390A – May 2014 – Revised June 2014
DRV2604L ERM, LRA Haptic Driver Evaluation Kit
Submit Documentation Feedback
Copyright © 2014, Texas Instruments Incorporated