Texas Instruments DRA72 Series, Руководство пользователя, Страница: 6 / 39

Overview
www.ti.com
6 SPRUIB9 – December 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
DRA72x EVM CPU Board User's Guide
• Memory:
– EMIF1 - DDR3L-1333 (with ECC): 2-Gbyte (four 4-Gbit × 8 + one 4-Gbit × 8 ECC)
– Quad SPI flash: 256 Mbit
– eMMC flash: 8 Gbit (v.4.51 compliant)
– NAND flash: 2 Gbit
– NOR flash: 512 Mbit
– I2C EEPROM, 256 Kbit
– MicroSD card cage
• Boot mode selection DIP switch
• Onboard temperature sensor
– TMP102
• JTAG/Emulator:
– 60-pin MIPI-60 JTAG/Trace connector
– 20-pin CTI adapter: 10 × 2, 1.27-mm pitch
– 14-pin adapter: 7 × 2, 2.54-mm pitch
• Audio input and output:
– AIC3106 codec: Headphone OUT, Line OUT, Line IN, Microphone IN
• Supported interfaces and peripherals:
– CAN interface – 2-wire PHY on DCAN1
– Two USB host receptacles:
• USB3.0 (micro-USB)
• USB2.0 (mini-USB)
– PCIe ×1 (×2 support with component change)
– Video – one HDMI Out, one FPD-Link III, one LCD
– Camera sensors support through Leopard Imaging Module interface, parallel and CSI2
– CSI2 generic connector interface
– MLB and MLBP on Mictor connector
– RS232 through USB FTDI converter (mini-A/B USB)
– COM8 module connector interface for Bluetooth
®
and WLAN support
– Gigabit Ethernet PHY (RJ45) x 2 (DP83867)
– SATA interface
– I2C GPIO expander
– LCD daughter board connector
• Expansion connectors to support specific applications
• Power supply:
– 12-V DC input
– Optimized power management IC (TPS65917)
– Compliant with power-sequencing requirements
– Integrated power measurement