Texas Instruments DM365, Руководство пользователя

Страница: 33 / 131

Installation Overview
2-9
2) Copy the reference files to the \client\test\testvecs\reference sub-
directory.
3) Edit the configuration file, Testvecs.cfg available in the
\client\test\testvecs\config sub-directory. For details on the format of
the testvecs.cfg file, see section 2.4.
For each encoded frame, the application displays the message
indicating the frame number. In reference bit-stream compliance check
mode, the application additionally displays FAIL message, if the bit-
stream does not match with reference bit-stream.
After the encoding is complete, the application displays a summary of
total number of frames encoded. In reference bit-stream compliance
check mode, the application additionally displays PASS message, if
the bit-stream matches with the reference bit-stream.
If you have chosen the option to write to an output file (X is 0), you can
use any of the standard file comparison utility to compare the codec
output with the reference output and check for conformance.
2.6 Uninstalling the Component
To uninstall the component, delete the codec directory from your hard disk.