LED
Connector
Flex Cable
Connector
www.ti.com
EVM Setup
Figure 6. Connection Main Board and DLP LightCrafter Display board
The board itself and how it gets connected to the main board is shown in
Figure 7
Figure 7. DLP LightCrafter Display
TA LED adapter board is connecting the three LEDs with the LED connector on the DLP LightCrafter™
Display board. The different connectors for each LED are named on the board as well as on the light
engine. Refer to
Figure 8
to see the proper setup.
Ensure a good connection of the flex cable to the DLP LightCrafter™ Display board before turning it on.
9
DLPU029A – October 2014 – Revised January 2015
DLP
®
LightCrafter™ Display 3010 EVM User’s Guide
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated