80.35
56.97
21.00
20.50
Light Engine
www.ti.com
4
Light Engine
The optical engine in the EVM is developed by eProtech and is production ready.
The light engine consists of the following components:
•
0.3-inch 720p DMD (DLP3010)
•
OSRAM red, green and blue LED
Table 1. Optical Engine specifications
Parameter
Min
Typ
Max
Unit
Brightness
125
Lum
LED Current
2.4
A
Brightness Uniformity
75%
Throw Ratio
1.65
Offset
100%
Focus Range
5
50
inch
Image diagonal size
5
50
inch
Figure 3.
5
Quick-Start Procedure
This quick-start assumes default conditions as shipped.
1. Power up the DLP LightCrafter™ Display 3010 EVM by applying an external DC power supply (5 V
DC, 3.0 A) to the J12 connector. Note: Use an AC-DC switching power supply which accepts 50-60Hz
100-240 VAC inputs, and outputs a nominal 5 VDC at maximum 3 A output current. The PWRON
(D16) and SYSPWR (D15) LED will turn on to indicate that 5 V power is applied
2. Move the SW_ONOFF switch to the ON position to turn the DLP LightCrafter Display 3010 EVM on.
When the LightCrafter Display 3010 EVM is turned on, the PROJ_ON LED will turn on.
3. After the DLP LightCrafter Display 3010 EVM is turned on; the projector will default to displaying a DLP
LightCrafter Display splash image.
4. The focus of the image can be adjusted on the optical engine.
4
DLP
®
LightCrafter™ Display 3010 EVM User’s Guide
DLPU029A – October 2014 – Revised January 2015
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated