Batch Files
43
DLPU028C – October 2014 – Revised November 2016
Copyright © 2014–2016, Texas Instruments Incorporated
Operating the DLP LightCrafter 6500 and 9000
Figure 3-13. Batch File Example
3.7.2.2
Creating a Batch File Using a Text Editor
Use a text editor to add the same three commands in the previous example. Refer to Appendix B in the
DLPC900 Programmer’s Guide for the list of command descriptors supported by the DLPC900.
When adding a command descriptor to the file, a colon must be between the descriptor and the
parameters. Use a space between the colon and each parameter and use ‘0x’ for each byte in the
parameter list. Remember that the parameters are least significant byte first. The lines below are what
should be in the text file.
FLIP_SHORT:
0x01
CHANNEL_SWAP:
0x0A
LED_CURRENT:
0x64 0x64 0x64
Once all three commands are added, save the file as a text file and use a name to describe what the
batch file does.