EVM Setup
www.ti.com
8
DLPU058 – September 2017
Submit Documentation Feedback
Copyright © 2017, Texas Instruments Incorporated
DLP
®
LightCrafter™ Display 3010 EVM Gen2 User's Guide
8
EVM Setup
The DLP LightCrafter Display 3010 EVM-G2 is composed of three parts:
•
Main board
•
DLP LightCrafter Display board
•
Engine with LED connection and Flex cable
The main board contains the connector for the power supply, a USB connector to communicate to the
DLP LightCrafter Display software, HDMI and the connector for the DLP LightCrafter Display board. The
main board also contains a switch to turn on the projector in case the DLP LightCrafter Display board and
the engine are connected.
Figure 5
shows the main connectors on the main board.
Figure 5. DLP LightCrafter Display Main Board
