2.5 Troubleshooting
Table 2-4. Troubleshooting the Problem and the Possible Solutions
Problem
Possible Solutions
EVM Status: Not Connected
1.
USB cable not connected.
2.
Command interface not set to USB. Go to Debug screen, Connection tab
and select USB as the Command Interface, click Connect.
3.
If the user has gone from using Advanced mode back to the DLPDLC-GUI,
then user will need to click on EVM Status message on bottom left of
DLPDLC-GUI screen to reestablish connection with GUI.
Quick Start
12
DLP® Display DLPC7540 4K UHD EVM
DLPU109 – MAY 2021
Copyright © 2021 Texas Instruments Incorporated
