11
SCHEMATIC DISCLAIMER AND WARNINGS
TI provides these schematic drawings to help users develop C2000 based reference
design products. Application safety, safety of the kit and design integrity of such
reference designs are solely the responsibility of the user. Any reference designs
generated off these schematics must take into account necessary product safety
design requirements, including interface components in order to avoid user risks
including potential for fire hazard, electrical shock hazard and personal injury,
including
considerations
for
anticipated
agency
certification
compliance
requirements.
Such product safety design criteria shall include but not be limited to critical circuit
creepages and clearances, component selection, and required protective means (ie
output fusing) depending on the specific loads being controlled.
TI accepts no responsibility for design integrity of any reference designs based on
supplied schematic drawings and the schematics are strictly for development
purposes.
EVALUATION BOARD/KIT IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following
conditions:
This evaluation board/kit is intended for use for
ENGINEERING DEVELOPMENT,
DEMONSTRATION, OR EVALUATION PURPOSES ONLY
and is not considered by
TI to be a finished end-product fit for general consumer use. Persons handling the
product(s) must have electronics training and observe good engineering practice
standards. As such, the goods being provided are not intended to be complete in
terms of required design-, marketing-, and/or manufacturing-related protective
considerations, including product safety and environmental measures typically found
in end products that incorporate such semiconductor components or circuit boards.
This evaluation board/kit does not fall within the scope of the European Union
directives regarding electromagnetic compatibility, restricted substances (RoHS),
recycling (WEEE), FCC, CE or UL, and therefore may not meet the technical
requirements of these directives or other related directives.
Should this evaluation board/kit not meet the specifications indicated in the User’s
Guide, the board/kit may be returned within 30 days from the date of delivery for a
full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY
SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR ANY PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the
goods. Further, the user indemnifies TI from all claims arising from the handling or
use of the goods. Due to the open construction of the product, it is the user’s
responsibility to take any and all appropriate precautions with regard to electrostatic
discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY
SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES.
TI currently deals with a variety of customers for products, and therefore our
arrangement with the user
is not exclusive
.
