Bill of Material and EVM Schematic
www.ti.com
6
Bill of Material and EVM Schematic
Table 4
contains a complete bill of materials for the DACxx68EVM. The schematic diagram also is
provided for reference.
6.1
Bill of Materials
Table 4. Bill of Materials
Designators
Description
Manufacturer
Mfg. Part Number
C1, C11
CAP CER 10UF 6.3V X5R 20% 0603
TDK
C1608X5R0J106M
C2
CAP CER 10UF 16V X5R 0805
Taiyo Yuden
EMK212BJ106KG-T
C3
CAP CER 22UF 10V X5R 0805
Taiyo Yuden
LMK212BJ226MG-T
C4, C5, C6
CAP CER .10UF 50V X7R 10% 0603
TDK
C1608X7R1H104K
C7, C10
NI
C8
CAP CER 1.0UF 16V X7R 10% 0603
TDK
C1608X7R1C105K
C9
CAP CER 2.2UF 10V X5R 0603
TDK
C1608X5R1A225K
J1A, J2A (Top Side)
10 Pin, Dual Row, SM Header (20 Pos.)
Samtec
TSM-110-01-T-DV-P
J1B, J2B (Bottom Side)
10 Pin, Dual Row, SM Header (20 Pos.)
Samtec
SSW-110-22-F-D-VS-K
J3A (Top Side)
5 Pin, Dual Row, SM Header (10 Pos.)
Samtec
TSM-105-01-T-DV-P
J3B (Bottom Side)
5 Pin, Dual Row, SM Header (10 Pos.)
Samtec
SSW-105-22-F-D-VS-K
JP1, JP2
Header Strip ( 2 x 1)
Samtec
TSW-102-07-L-S
JP3 - JP6
Header Strip (3 x 1)
Samtec
TSW-103-07-L-S
R1, R2, R10
RES 10.0K OHM 1/10W 1% 0603 SMD
Yageo
RC0603FR-0710KL
R3, R6
RES 0 OHM, 1/16W 5% 0603 Chip Resistor
Yageo
RC0603JR-070RL
R4
RES 1.5 OHM 1/10W 5% 0603 SMD
Yageo
RC0603JR-071R5L
R5
RES 2.00K OHM 1/10W 1% 0603 SMD
Yageo
RC0603FR-072KL
R7, R8, R9
RES 33.0 OHM 1/10W 1% 0603 SMD
Yageo
RC0603FR-0733RL
TP1, TP3, TP5
TEST POINT PC MINI 0.040"D RED
Keystone
5000
TP2, TP4
TEST POINT PC MINI 0.040"D BLACK
Keystone
5001
U1
(1)
Device Under Test
TI
DAC8568/8168/7568ICPW
U2
IC PREC V-REF 2.5V LN 8-SOIC
TI
REF5025AID
U3
IC OPAMP GP R-R 90KHZ SOT23-5
TI
OPA379AIDBVT
(1)
The device installed at location U1 is dependent on the EVM ordered. This device is soldered to the board for best performance.
U1 may be replaced with any device listed in the EVM Compatible Device Data Sheets table found at the beginning of this
document.
6
DACxx68EVM
SLAU301 – November 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated