Texas Instruments CC3100 SimpleLink, Руководство пользователя

Страница: 15 / 27

www.ti.com
Connecting to the PC Using EMUBOOST
3 Connecting to the PC Using EMUBOOST
3.1 CC31XXEMUBOOST
3.1.1 Overview
The CC31XXEMUBOOST is designed to connect the BoosterPack to a PC using a USB connection. This
updates the firmware patches, which are stored in the serial flash, on the BoosterPack; and in software
development using SimpleLink Studio.
3.1.2 Hardware Details
Figure 12. CC31XXEMUBOOST Board
The board has two FTDI ICs to enumerate multiple COM and D2XX ports. The details of the ports are
given in
Table 6 .
Table 6. Ports Available on J6
Port
Number Port Type Usage Comments
1 D2XX SPI port for SL Studio
2 D2XX GPIO for SL Studio Control the nRESET, nHIB, IRQ
3 VCP COM port for Flash
programming
4 VCP NWP Network processor logger output. Used with specific tools to analyze the
network processor logs. For TI use only.
NOTE: On the PC, only two of the four ports would be visible on the Device Manager. The D2XX
ports are not listed under the “Ports” tab.
15 SWRU371B – June 2014 – Revised January 2015 CC3100 SimpleLink™ Wi-Fi
®
and IoT Solution BoosterPack Hardware
Submit Documentation Feedback
Copyright © 2014–2015, Texas Instruments Incorporated