Evaluation Software Details
5.3.2
Command Menu
RESET allows resetting either the current device,
or the entire stack with one command. (Note: The
stack is reset using a BROADCAST command
packet, whether Broadcast is selected as the
current device or not.)
RELOAD SHADOW REGISTERS will re-initialize
the Group-3 Protected Registers from the OTP
EPROM. This is useful to verify programming.
Because the part is shipped unprogrammed, the result of reloading the shadow registers is to transfer all
zeros to the shadow cells, and will usually result in many ALERTS and FAULTS being triggered which
are normally hidden by the GUI per the OPTION menu settings (see below).
REFRESH updates the screen contents, and is equivalent to the large REFRESH button in the Volatile
registers area.
11
SLUU437B
–
October 2010
–
Revised May 2011
bq76PL536 EVM Quick Start Guide
Copyright
©
2010
–
2011, Texas Instruments Incorporated
