Texas Instruments bq76930 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 61

Texas Instruments bq76930 Скачать руководство пользователя страница 12

bq76940/bq76930/bq76920 Software

4.1

System Requirements

The bq76940/bq76930/bq76920 software requires Windows 7, or later operating system. The computer
must also have Microsoft® .NET connection software version 4.0 or higher installed. Examples in this
document are from Windows 7.

4.2

Installing the bq76940/bq76930/bq76920 Software

Find the latest software version in the software section of the EVM tool folder

http://www.ti.com/tool/bq76930EVM

or

http://www.ti.com/tool/bq76940EVM

or search from

Check periodically for software updates. Use the following steps to install the bq76940/bq76930/bq76920
Software:

1. Copy the archive file to a directory of your choice, extract all files and run the setup.exe application.

2. Follow the instructions and make selections as required on the setup windows selecting

Next

as

required. Installation in the default location is suggested.

3. On the last window, select

Close

to complete the bq76940/bq76930/bq76920 software installation.

4.3

Interface Adapter

The interface adapter should not be connected to the I2C connector if a gauge or MCU is connected to
the bus. Board pull-up shunts must be installed for the EV2300 and removed for the EV2400

4.4

Software Operation

This section describes connection of the communication interface to the EVM and operation of the
software.

Although the software runs without connection to a powered device, TI recommends having the device on
when starting the software. Follow the directions in the

section.

shows connections for

operation with the GUI software.

Start the software from the desktop shortcut

bq769X0 Evaluation Software

or the menu

Start

→

All

Programs

→

Texas Instruments

→

bq769X0 Eval Software

When started, the software looks for the communication interface and the device. If either is not found, a
popup window appears and must be acknowledged. When communication is established with the device,
the main window appears as shown in

.

The bq76940/bq76930/bq76920 software uses popup help tips on many of the control features.

12

bq76930 and bq76940 Evaluation Module User's Guide

SLVU925B – April 2014 – Revised July 2014

Submit Documentation Feedback

Copyright © 2014, Texas Instruments Incorporated

«
...
10
11
12
13
14
...
»

Содержание bq76930






























































Отзывы:

Нет отзывов