IPG-UI Setup for BOOSTXL-TPS65218
12
SLVUBH5 – October 2018
Copyright © 2018, Texas Instruments Incorporated
Software Instructions
Figure 9. Successful Write Access to TPS65218D0 Notification
•
If all register data remains 0x00 and a red notification appears (as in
), it indicates the
computer can talk to the USB2ANY but cannot communicate with the TPS65218D0 device. The
primary cause of this issue may be that the power switch for the BOOSTXL-TPS65218 is in the
OFF
position, the socket does not have a sample installed, or the USB cable is not plugged into the
MSP430F5529 LaunchPad or the computer. In case of either issue, the test setup of the EVM must be
debugged before continuing.
Figure 10. Failed GUI Communication to TPS65218D0 Notification
NOTE:
At the time of writing this document, the IPG-UI software version is 2.5.0.4 and the
TPS65218 file version is 1.2.
