Texas Instruments BOOSTXL-DRV2625, Руководство пользователя

Страница: 20 / 27

BoosterPack Demo Firmware Programming
www.ti.com
20 SLOU515 – July 2019
Submit Documentation Feedback
Copyright © 2019, Texas Instruments Incorporated
DRV2625 Haptics BoosterPack™ Plug-In Module
Table 3. Bill of Materials (continued)
Designator Qty Value Description Package Reference Part Number Manufacturer
C5 1 10µF CAP, CERM, 10 uF, 6.3 V, +/- 20%, X5R,
0603 0603 GRM188R60J106ME47D MuRata
C7 1 1µF CAP, CERM, 1 uF, 10 V, +/- 10%, X5R,
0603 0603 GRM188R61A105KA61D MuRata
D1 1 Green LED, Green, SMD 1.6x0.8mm LTST-C193KGKT-5A Lite-On
GND 1 Test Point, Compact, Black, TH Black Compact
Testpoint 5006 Keystone
J1/J3, J2/J4 2 Receptacle, 2.54mm, 10x2, Tin, TH 10x2 Receptacle SSQ-110-03-T-D Samtec
J5 1 Terminal Block, 100mil, 2x1, 6A, 63V, TH 6.2x8.5x5.54 mm 1725656 Phoenix
Contact
OUT+, OUT- 2 Test Point, Compact, Orange, TH Orange Compact
Testpoint 5008 Keystone
R1, R4 2 100k RES, 100 k, 1%, 0.063 W, AEC-Q200 Grade
0, 0402 0402 CRCW0402100KFKED Vishay-Dale
R2, R3 2 2.20k RES, 2.20 k, 0.1%, 0.0625 W, AEC-Q200
Grade 0, 0402 0402 ERA2AEB222X Panasonic
R6 1 360 RES, 360, 5%, 0.1 W, AEC-Q200 Grade 0,
0402 0402 ERJ-2GEJ361X Panasonic
R7 1 47.0k RES, 47.0 k, 1%, 0.0625 W, 0402 0402 RC0402FR-0747KL Yageo America
U1 1 Advanced ERM & LRA Haptics Driver with
Smart Loop and Embedded Effects Library,
YFF0009AHAN (DSBGA-9) YFF0009AHAN DRV2625YFFR Texas
Instruments
U2 1 Capacitive Touch Sensing Mixed-Signal
Microcontroller, PW0016A (TSSOP-16) PW0016A MSP430FR2512IPW16R Texas
Instruments
FID1, FID2,
FID3 0 Fiducial mark. There is nothing to buy or
mount. N/A N/A N/A
J6 0 Header, 2.54 mm, 4x1, Gold, TH Header, 2.54 mm,
4x1, TH PBC04SAAN Sullins
Connector
Solutions
R5 0 2.20k RES, 2.20 k, 0.1%, 0.0625 W, AEC-Q200
Grade 0, 0402 0402 ERA2AEB222X Panasonic
9 BoosterPack Demo Firmware Programming
Taking as example the Demo Firmware configuration, the following procedure is used to program the
DRV2625 BoosterPack with the CapTIvate Programming Tool.
1. Connect the CapTIvate MCU Programmer to the BOOSTXL-DRV2625 board.
Pins 9, 10, 18 and 19 from the J301 component of the CapTIvate MCU Programmer are required to
configure the BoosterPack. These pins must be connected to the 4 pins of the J6 component of the
BoosterPack. Use
Table 4 as a reference:
Table 4. CapTIvate Programmer and BoosterPack Pins Connection
CapTIvate MCU Programmer (J301) BOOSTXL-DRV2625 (J6)
SBWTCK_TST (pin 10) SBWTCK (pin 2)
SBWTDIO_RST (pin 9) SBWTDIO (pin 3)
3.3V (pin 18) 3.3V (pin 1)
GND (pin 19) GND (pin 4)
For more details about the BOOSTXL-DRV2625 pins, see Section 8.1 of this user’s guide.
For details about the CapTIvate MCU Programmer, see Hardware Section of the CapTIvate-PGMR
Guide .
2. Connect the CapTIvate MCU Programmer to the PC.
Use a micro-USB cable to connect the programmer to the PC. The required drivers must be installed
once the device is powered up.
3. Download the Demo Firmware and Open it with Code Composer Studio (CCS).