Texas Instruments AWR2944EVM, Руководство пользователя, Страница: 13 / 36

Figure 2-4. 12-V Power Connector
Note
After the 12-V power supply is provided to the EVM, it is recommended to press the NRST switch
(SW1) one time to ensure a reliable boot-up state.
2.4 Connectors
2.4.1 MIPI 60-Pin Connector (J19)
This connector provides the standard MIPI 60-pin interface, as shown in Figure 5, for JTAG, CSI2 and trace
capability through emulators such as the XDS560pro. Further information on the emulation and trace header can
be found in the
Emulation and Trace Headers Technical Reference Manual. This connector also provides access
to the CSI_RX lanes which allow for playback or feeding external data and bypassing the RF front end, which
enables testing and algorithm development on a known dataset.
To use this interface, the JTAG lines from the AWR2944EVM needs to be muxed to MIPI 60-pin connector. Refer
to
Section 2.7.1 for more details.
www.ti.com Hardware
SPRUJ22 – NOVEMBER 2021
Submit Document Feedback
AWR2944EVM User’s Guide 13
Copyright © 2021 Texas Instruments Incorporated