Texas Instruments AMC7812EVM-PDK, Руководство пользователя

Страница: 5 / 33

www.ti.com
AMC7812EVM Hardware Setup
2.2 Signal Definitions of J1 (20-Pin Male Connector Socket)
The AMC7812EVM includes a 20-pin connector socket used to communicate between the EVM and the
SDM-USB-DIG platform. The pin out of the J1 connector is shown in
Table 3 .
Table 3. J1 Signal Definition
Pin on J1 Signal Description
1 SCL I
2
C clock signal (SCL)
2 DIG_GPIO2 GPIO – Control output or measure input
3 DIG_GPIO0 GPIO – Control output or measure input
4 DIG_GPIO3 GPIO – Control output or measure input
5 SDA I
2
C data signal (SDA)
6 DIG_GPIO4 GPIO – Control output or measure input
7 DIG_GPIO1 GPIO – Control output or measure input
8 DIG_GPIO5 GPIO – Control output or measure input
9 MOSI SPI data output (MOSI)
10 DIG_GPIO6 GPIO – Control output or measure input
Switchable DUT power supply: +3.3 V, +5 V, Hi-Z (disconnected).
11 VDUT
Note: When VDUT is Hi-Z all digital I/O are Hi-Z as well.
12 DIG_GPIO7 GPIO – Control output or measure input
13 SCLK SPI clock signal (SCLK)
14 DIG_GPIO8 GPIO – Control output or measure input
15 GND Power return (GND)
16 DIG_GPIO9 GPIO – Control output or measure input
17 CS SPI chip select signal (/CS)
18 DIG_GPIO10 GPIO – Control output or measure input
19 MISO SPI data input (MISO)
20 DIG_GPIO11 GPIO – Control output or measure input
5 SBAU177D – September 2010 – Revised August 2014 AMC7812EVM-PDK User’s Guide
Submit Documentation Feedback
Copyright © 2010–2014, Texas Instruments Incorporated