Texas Instruments ADS8910B, Руководство пользователя

Страница: 17 / 39

www.ti.com
ADS8910BEVM-PDK Operation
17 SBAU268 – July 2016
Submit Documentation Feedback
Copyright © 2016, Texas Instruments Incorporated
ADS8910BEVM-PDK
6.2 Register Map Configuration Tool
The register map configuration tool allows the user to view and modify the registers of the ADS8910B.
This tool can be selected by clicking on the Register Map Config radio button at the Pages section of the
left pane, as indicated in
Figure 10 . On power-up, the values on this page correspond to the Host
Configuration Settings that enable ADC sampling at the maximum sampling rate specified for the ADC.
The register values can be edited by double-clicking the corresponding value field. If interface mode
settings are affected by the change in register values, this change reflects on the left pane immediately.
The effect of changes in the register value reflect on the ADS8910B device on ADS8910BEVM-PDK
based on the Update Mode selection, as described in
Section 6.1 .
Figure 10. Register Map Configuration
Section 6.3 through Section 6.7 describe the data collection and analysis features of the ADS8910BEVM-
PDK GUI.