ADS8350EVM-PDK Initial Setup
The following steps describe how to install the simple capture card device driver.
Step 1.
Immediately after the ADS8350 EVM software installation is complete, prompts appear to
install the simple capture card device driver, as shown in
and
Step 2.
A computer restart may be required to finish the software installation. If prompted, restart the
PC to complete the installation.
Figure 14. Simple Capture Card Device Driver Installation
Figure 15. Simple Capture Card Device Driver Completion
15
SBAU218A – April 2014 – Revised October 2014
ADS8350EVM-PDK
Copyright © 2014, Texas Instruments Incorporated