Software Control
7
SLAU485A – January 2013 – Revised April 2016
Copyright © 2013–2016, Texas Instruments Incorporated
ADS4449 EVM User Guide
this writing)
•
Run Setup.exe
•
Follow the on-screen instructions
•
Once installed, launch by clicking on the ADS4449_GUI_vxpx program in Start
→
All Programs
→
Texas Instruments ADCs
•
When plugging in the USB cable for the first time, the Found-New-Hardware-Wizard prompts to install
the USB drivers
–
When a pop-up screen opens, select
Continue Downloading
–
Follow the on-screen instructions to install the USB drivers
–
If needed, access the drivers directly in the install directory
2.2
Software Operation
The ADS4449 EVM GUI software allows programming control of the ADS4449 device. The front panel
provides a tab for common control of the ADS4449. The GUI tabs provide a convenient and simplified
interface to the most-used registers of each device.
2.2.1
Control Options
Figure 6. ADS4449 Main Control Panel
