Click on the cog next to “ADC Output Data Rate”.
• In the new dialogue box, check the "Enable?" box.
• Under “ADC Sampling Rate”, enter "60M"
• Under “ADC Input Frequency”, enter "10M"
• Under "NCO", enter "9.9M"
• Under “Decimation”, enter "16".
• Click "OK".
Figure 4-12. Complex Decimation Mode HSDC Pro Parameters
• Select "Complex FFT"
Device Configuration
18
ADC364xEVM Evaluation Module
SBAU232 – OCTOBER 2020
Copyright © 2020 Texas Instruments Incorporated