Texas Instruments ADC1xD1x00CVAL Series Скачать руководство пользователя страница 1

Страница: 1 / 20

SNAU212 – June 2017

ADC1xD1x00CVAL Board User’s Guide

User's Guide

SNAU212 – June 2017

ADC1xD1x00CVAL Board User’s Guide

The ADC1xD1x00QML products are low-power, high-performance 10b and 12b ADCs with sampling rates
up to 1.6 GSPS as a dual-channel ADC or 3.2 GSPS in a single-channel interleaved mode. These
products come in a hermetic 376 column ceramic grid array package (376 CCGA) for harsh environments,
such as down hole or space.

Contents

Overview

.....................................................................................................................

Lab Equipment

..............................................................................................................

2.1

Required Lab Equipment

..........................................................................................

2.2

Optional Lab Equipment

..........................................................................................

Driving the Clock and Inputs

...............................................................................................

3.1

Driving the Sampling Clock

........................................................................................

3.2

Driving the Analog Inputs

..........................................................................................

Jumper Settings

..............................................................................................................

Board Power Up

.............................................................................................................

5.1

Power Supply

.......................................................................................................

5.2

Power-Up Sequence

...............................................................................................

5.3

VBG Pin

..............................................................................................................

5.4

Samtec Connector

.................................................................................................

Using the AARDVARK

.....................................................................................................

Importing Data into WaveVision5

.......................................................................................

List of Figures

ADC1xD1x00CVAL Board

..................................................................................................

Flow-Through Routing for the Samtec Connector

.......................................................................

Samtec Connector Footprint

...............................................................................................

Samtec Connector Ordering Information

.................................................................................

Aardvark I2C/SPI Host Adapter

...........................................................................................

Level Translator for Aardvark to ADC

....................................................................................

Logic Analyzer Data Listing View

........................................................................................

List of Tables

Output Data Rate Per Bank by Mode

.....................................................................................

ADC12D16x0 Output Data Rate Example

...............................................................................

Control Pins and Function

..................................................................................................

Non-ECM Pin Control Settings

.............................................................................................

Trademarks

All trademarks are the property of their respective owners.

Содержание ADC1xD1x00CVAL Series





















Результаты поиска

Содержание ADC1xD1x00CVAL Series

Отзывы:

Похожие инструкции для ADC1xD1x00CVAL Series

Бренды по названию

Популярные бренды

Texas Instruments ADC1xD1x00CVAL Series, Руководство пользователя

Результаты поиска

Содержание ADC1xD1x00CVAL Series

Отзывы:

Похожие инструкции для ADC1xD1x00CVAL Series

Бренды по названию

Популярные бренды