Lab Equipment
3
SNAU212 – June 2017
Copyright © 2017, Texas Instruments Incorporated
ADC1xD1x00CVAL Board User’s Guide
Figure 1. ADC1xD1x00CVAL Board
2
Lab Equipment
2.1
Required Lab Equipment
The following lab equipment is required to use the ADC1xD1x00 EVAL board:
•
Bench supply to drive 1.9 V at 3 A
•
1 signal gen bandpass balun to drive sampling clock. Suggested equipment:
–
SMA100A with B22 enhanced low phase-noise option
–
Trilithic 5VF tunable filter
•
1 signal generator to drive the analog input
•
High-speed Logic Analyzer to capture the data. Suggested equipment:
–
Keysight 16702B Logic Analysis System
–
Keysight 16760A Timing and State Module
–
Keysight E5379A Differential Probe Adapter
–
Keysight E5386A Half-channel Probe Adapter (for data rates greater than 800MSPS)
