2 ADC-PHI-PRU-EVM Overview
shows the two main connectors of the ADC-PHI-PRU-EVM adapter card. The 150-pin high-speed
expansion (HSE) connector is on the left and mates with the AM64x and AM243x general purpose (GP)
development platform HSE connectors. The 60-pin Q-strip (QSH) connector is on the right and mates with the
precision ADC EVMs listed in
. Three jumpers (J2, J9, and J11) on the ADC-PHI-PRU-EVM select the
following settings:
• J2 shorts the CONVSTA and CONVSTB signals together for operation with a single CONVST signal
• J9 configures the MUX to select either serial or parallel mode to communicate with the precision ADC EVM
• J11 selects either 1.8 V or 3.3 V as the DVDD voltage for the precision ADC EVM
Figure 2-1. ADC-PHI-PRU-EVM System Architecture
ADC-PHI-PRU-EVM Overview
4
ADC-PHI-PRU-EVM Evaluation Module
SBAU396 – MAY 2022
Copyright © 2022 Texas Instruments Incorporated