Open the ADCxxDJxx00EVM GUI and Program the ADC and Clocks
11
SLAU701A – May 2017 – Revised January 2018
Copyright © 2017–2018, Texas Instruments Incorporated
Setup Procedure
Figure 3-2. Configuration GUI EVM Tab
and
show the GUI open to the
EVM
tab and
Control
tab respectively. Tabs at the
top of the panel organize the configuration into device and EVM features with user-friendly controls and a
low-level tab for directly configuring the registers. The EVM has three configurable devices, namely the
ADCxxDJxx00, LMK04828, and LMX2582. The register map for each device is provided in the device data
sheet (
, and
, respectively).
1. Open the ADC12DJxx00EVM GUI.
2. Select the onboard clock as the clock source.
3. Select Fs = 2700 MHz MSPS as the onboard Fs selection.
4. If using the ADC12DJ2700EVM or ADC12DJ3200EVM, select JMODE0 for the decimation and serial
data mode. If using the ADC08DJ3200EVM, select JMODE5 for the decimation and serial data mode.
5. Click
Program Clocks and ADC
(Note: This action will overwrite any previous device register settings.)