Texas Instruments 2N7001TEVM, Руководство пользователя, Страница: 3 / 10

www.ti.com
Introduction
3 SCEU013 – May 2018
Submit Documentation Feedback
Copyright © 2018, Texas Instruments Incorporated
2N7001T Evaluation Module
1.2.2 Headers
The EVM has standard 100-mil headers (J1 and J2) with the side that is closer to the device connected to
ground. Shown in
Figure 1 , the side that is farther away from the device is routed to the device pinout for
easier connection. The silkscreen indicates the pin function. These headers are used to apply the V
CCA
and V
CCB
voltages. Additionally, if R1 and R2 are not populated, these headers will need to be used to
input the signal to pin A and measure the output from pin B of the 2N7001TDPWR device. A simplified
diagram of header J2 is shown in
Figure 2 to show what each pin is connected to.
Figure 2. J2 Header Simplified Diagram