23
Maintenance and service
Warnings!
Before you examine, service and clean the machine, you must turn off the power switch and disconnect the power cable from the
socket. Such operations should not be performed until the roll shaft stops completely.
I n order to prevent potential mechanical defaults, please conduct duly maintenance and service to the machine before and
after the utilization season.
Always be cautious not to damage the cable. When pull out the plug from the socket, do NOT drag the cable with force
directly.
The snow blowing rubber plates on the roll shaft are consumable parts and should be inspected regularly. Always check the
rubber plates for any damages or aging degradation.
When you store the machine while not in use, be careful to store the machine in a place:
Where children can NOT reach.
Where temperature and humidity will NOT alter constantly and sharply.
Where sunlight can shine directly.
Where rain water or fog occur frequently.
Where the ground is tilt or unstable.
Additionally, please do NOT store the machine outdoors.
Specifications
Note: Due to different natures of snow, actual specifications may vary slightly.
Lengthening Cable
If a lengthening cable is necessary, please choose thick cables and the operation time should not be too long.
Generally you should choose an overall plated cable.
The Cable must be water-proof with rated current of 8A or higher.
When a lengthening cable is used, due to its current factors, the maximum output power may not be achieved.
