13
Depending on the conditions you should add chain oil for every 30-45 minutes of use, so check oil
level often. If the pruner is used without chain oil, the chain will be damaged.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
The line cannot be pulled
forward.
1. The line is melted together. Replace. You may be using the tool too close to
stones and walls.
2. Too little line.
Fit more line.
3. The line is worn short.
Pull out more line while alternately pressing the line
head down and letting go.
4. The line is entangled.
Remove the line from the spool and fit it again.
5. The rotations of the engine
are too slow.
Pull out more line at full speed.
Grass is wrapped around
the gear head or line
head.
1. Tall grass is cut at base.
Cut the grass from the top and downwards.
2. The trimmer is not used at
full speed.
Use the trimmer at full speed.
The spool head is difficult
to turn.
The threads are dirty,
damaged or full of grass.
Clean the threads and grease or change the spool
head. Remove any grass.
‘
Содержание Smart Combi 100
Страница 2: ...2 Illustrationer illustrations Fig 1 A B Fig 2 Fig 3 D A B C...
Страница 3: ...3 Fig 4 Fig 5 1 2...
