Texas Equipment Razor 3300Li Скачать руководство пользователя страница 13

Страница: 13 / 20

Start

Never start the mower directly on long grass.
1. Open the batttery cover (9) on the motor unit, slide

in the battery (10) and click it in place (illustration 5)

2. Make sure the safety key (12) is inserted

(illustration 8).

3. Hold the start button (1) down and activate the

handlebar for engine brake (2) to start the motor.
Release startbutton once started (illustration 1).

Note:

As long as operating the mower, the handlebar

for engine brake must be engaged.

Stop:

1. Release the engine brake to turn off the mower and

the engine

Note: The blades will still rotate at up to 3 seconds
after stopping.

Remove the battery

To remove the battery, press and hold the latch button
under the battery and pull it out.

Working time

The working time per full charge depends of several
factors, like length of grass, cutting height and cutting
methods (mulching or collection).

Variable motor-speed

The motor adjusts the blade-rotations to match the load
(length and thickness of the grass). You will therefore
hear that the motor-speed will go up/down while cutting
the grass. This is perfectly normal and ensures a more
energy-effective use of the power from the battery.

Indicator for full grass collector (illustration 7)

The practival indicator (A) on the grass collectors tells,
when it is full of grass and need to be emptied.

Blade

Inspection of the blade

•

Tilt the mower with the front upwards.

•

Inspect blade for damage, cracks or excessive rust
or corrosion.

•

Check that the blade bolt is tightened.

Note:

A dull blade can be sharpened! But a blade that

is worn, bent, cracked or otherwise damaged must be
replaced.

Removing the blade: See illustration 11

If you remove the blade to sharpen or replace it, you
must use a torque wrench and some heavy gloves to
protect your hands.
1. Loosen the blade bolt with the included tool. Use a

piece of wood to prevent the blade from turning
around.

2. Remove the bolt, washer, blade and blade holder

in that order

3. Sharpen or replace the blade.
4. Insert the blade holder, blade, washer and bolt in

that order.

5. Tighten the blade bolt with 25 Nm with the included

tool. Use a piece of wood to prevent the blade from
turning around.

Warning

: A blade must be sharpened so it is in

100 % balance, otherwise it may cause vibrations that
could damage the engine. Damage to engine due to
faulty sharpening is not covered by warranty. We
therefore recommend letting a service center sharpen
the blade.

Storage and maintenance

Maintain your lawnmower:

Check all bolts, screws,

nuts and deck. Dismount the blade and the belt plastic
cover for regular cleaning. Always make sure that the
blade is sharp. Keep the motor unit free from grass and
dirt. It’s a good idea to take your lawn mower to an
annual service check with your authorized service
dealer. See your nearest service center at
www.texas.dk.

Storage:

After use the lawnmower kept in a dry and

clean room. Clean the machine after every use. Grass
and dirt must be removed from the underside of the
deck. Remove the safety key before cleaning and
storage.

Winter storage:

Spray silicone lubrication into the

cables and move them.
Finally, clean the mower thoroughly. Dip a cloth in oil
and luricate metal parts to prevent rust. For storage of
battery, see “Battery” section.

Specifications

Lawn mower model

Razor 3300Li

Motor 18V

battery

Self-propelled No
Cutting width

33 cm

Height adjustment

25-75 mm (5 positions)

Mulching

Yes

Side discharge